# How To Calculate Total Magnification

This article describes how to calculate the effective magnification and the size of your sample on your monitor when using a digital camera on a microscope.

### Magnification on the TV Monitor

In order to determine the total
magnification on the TV monitor, the following variables must be known:

1. Objective magnification
3. CCD chip diagonal dimension
4. TV monitor diagonal dimension

The formula used to calculate total magnification on the TV monitor is:

Total Magnification = Objective Magnification x Microscope Adapter Magnification x Video Magnification

The video magnification is determined by dividing the TV monitor diagonal (mm) by the CCD chip diagonal (mm). A reference chart is given below which shows video magnification for various monitor and chip sizes. To determine “Video Magnification” on a computer monitor divide the actual
image diagonal (as measured on the screen) by the CCD chip diagonal.

9″ 12″ 13″ 19″ 20″ 27″
1/3″ 38.1x 50.8x 55.0x 80.4x 84.7x 114.3x
1/2″ 28.6x 38.1x 41.3x 60.3x 63.5x 85.7x
2/3″ 20.8x 27.7x 30.0x 43.9x 46.2x 62.3x
1.0″ 14.3x 19.1x 20.6x 30.2x 31.8x 42.9x

What is the magnification on the TV monitor when using a 10X objective, 0.45x video coupler, a 1/2″ format CCD and a 19″ monitor?

### Determining the Size of Your Specimen

The approximate real size of a specimen can be determined by dividing the length of the specimen measured on the monitor screen by the total magnification on the monitor.

In the above example, if the measured length of a specimen was 100 mm, the
real size of the specimen would be:

Real
Size of Specimen
= 100 mm
/ 271.35
= 0.37 mm